Do It Yourself Turban Headband
There are many ways to interject an individuals personality into their clothing and one way it to make a unique turban headband. These bands can come in any fabric and can have any design a person may want. Many people would like to create and design their own instead of buying one from the store. Thats what this article will describe how to do.
Before starting any project, make sure that all materials are available. This project requires scissors, fabric, needle and thread. Optional materials are a hot glue gun, broach or button, sequins, rhinestones, or glitter. All these materials can be found easily at local craft stores.
Picking the right fabric is very important. Its necessary to make sure the fabric is long enough to wrap the head once and about double the width wanted for the band. It needs to be cut to the right length. Measure carefully to ensure it stays long enough.
Once the fabric is cut and measured, lay it out straight and fold the long edges into the middle. Go down the entire length of the fabric making sure it lines up in the middle and that the edges are straight. Then, fold the fabric in half lengthwise. The edges should line up and be straight.
Its a good idea at this point to pin the edges with straight pins. This will ensure that the edges do not slip and will make it much easier to securely sew to two ends together in the next step. This may also be a good time time to make sure it will fit before sewing it. It should be snug and not tight.
The needle and thread will now be used to sew the short edges together. Tie a knot in the end of the thread so that it does not pull through while being stitched. If a pleated look is desired, gently pull the thread through the fabric until the fabric pleats. Go over this area as many time as necessary to ensure it stays. This is what holds the band together so it needs to be tight and secure.
Take the button or broach and center it in the band. Use the thread to fix it to the band. It should be stable and not wiggly or loose. A hot glue gun can also be used for this step but it may be a little messier than the thread.
Some people like to go one step further and add sequins or rhinestones. This can be done with a glue gun for the rhinestones and needle and thread for the sequins. This can add a more personalized touch and draw a lot more attention. This option allows them to be personalized with a name or favorite phrase.
There are all kinds of ways to display some unique style to the world but not many of those ways can be as easily personalized as the turban headband. They make great gifts for family and friends and anyone can make them. The process does not take long and its fun to do. That makes this a great activity for children and beginner crafters.
Before starting any project, make sure that all materials are available. This project requires scissors, fabric, needle and thread. Optional materials are a hot glue gun, broach or button, sequins, rhinestones, or glitter. All these materials can be found easily at local craft stores.
Picking the right fabric is very important. Its necessary to make sure the fabric is long enough to wrap the head once and about double the width wanted for the band. It needs to be cut to the right length. Measure carefully to ensure it stays long enough.
Once the fabric is cut and measured, lay it out straight and fold the long edges into the middle. Go down the entire length of the fabric making sure it lines up in the middle and that the edges are straight. Then, fold the fabric in half lengthwise. The edges should line up and be straight.
Its a good idea at this point to pin the edges with straight pins. This will ensure that the edges do not slip and will make it much easier to securely sew to two ends together in the next step. This may also be a good time time to make sure it will fit before sewing it. It should be snug and not tight.
The needle and thread will now be used to sew the short edges together. Tie a knot in the end of the thread so that it does not pull through while being stitched. If a pleated look is desired, gently pull the thread through the fabric until the fabric pleats. Go over this area as many time as necessary to ensure it stays. This is what holds the band together so it needs to be tight and secure.
Take the button or broach and center it in the band. Use the thread to fix it to the band. It should be stable and not wiggly or loose. A hot glue gun can also be used for this step but it may be a little messier than the thread.
Some people like to go one step further and add sequins or rhinestones. This can be done with a glue gun for the rhinestones and needle and thread for the sequins. This can add a more personalized touch and draw a lot more attention. This option allows them to be personalized with a name or favorite phrase.
There are all kinds of ways to display some unique style to the world but not many of those ways can be as easily personalized as the turban headband. They make great gifts for family and friends and anyone can make them. The process does not take long and its fun to do. That makes this a great activity for children and beginner crafters.
About the Author:
If you are looking for turban headband information visit us online at www.turbanizer.com . To learn more about the services we offer visit us at http://www.turbanizer.com today.
0 comentários:
Postar um comentário